Seiwa Tokonole Leathercraft Tragacanth, Leather Burnishing Gum 20/120/500g

Description

TOKONOLE from Seiwa - Water-based polishing agent for leather and bahtarma.
Allows you to quickly and beautifully polish the surface.
Supplied in original 120g can.
The product can be applied with your fingers. If you have sensitive skin, it is best to use gloves.
Mode of application:
- for cutting: Apply a small amount in a thin layer on the surface of the edge of the skin.
If the product has "protruded" over the edge, it is recommended to quickly remove it to avoid stains.
When the toconol is half dry, polish with a slicker.
You can also buff it off with a soft cloth.
- for bakhtarma: Apply the product to the seamy part of the skin with a thin layer. WARNING: not suitable for suede and nubuck.
You can spread the product with your fingers (this is the easiest and most effective), but you can also use a folded and sealed cotton cloth (see photo).
When the toconol becomes semi-dry, wipe it with a glass plate. The fibers are suppressed and gloss appears. Or wipe it down with a rag.
At the same time, watch out, if you apply too much force, the skin will stretch and its thickness will change, so be careful.
TOKONOLE penetrates deeply into the skin fibers and suppresses frizz for a long time.
Blended with natural wax, it forms a soft and durable film while maintaining the natural texture and feel of the skin.
This product is soluble in water. You can use any finishing agent or pigment even after using it.
After polishing the edge, you can also use it by painting with Seiwa Cova Super edge paint.